TSHR international introduces the Total Chlorine Analyzer, model TX 3000, as a chlorine residual analyzer that gets you the necessary data quickly, reliable and accurately. The TX 6000 chlorine residual analyzer is matrix independent and complies fully with the international industrial and environmental standards. Purchase this combined chlorine analyzer online.
The following accessories are recommended for purchase in sequential order (see eStore):
| Specific compliant methods | ASTM D4929, ASTM D5194, ASTM D5808 | |
| Parameter | TX Liquids / TX Solids | |
| Working ranges | TX Liquids: 0,2 – 5.000 ppm TX Solids: 0,2 – 10.000 ppm |
|
| Detection Limit | TX Liquids: 100 ppb TX Solids: 100 ppb |
|
| Sample Matrix | TX Liquids: Heavy hydrocarbons, plastics, Solids | |
| Quantity of sample | TX Liquids: 0,1 – 100 mg | |
| Analysis time | TX Liquids: 4-10 minutes | |
| Relative standard deviation | TX Liquids: < 5% | |
| Parameter | 6000 series | |
| Furnace Temperature Sensor | 2 x Ni-Cr/Ni | |
| Furnace configuration | Dual temperature controlled | |
| Furnace Temperature | 1250 °C Max | |
| Type of Analyses | Total Halogens and coulometric sulfur | |
| Detection Principle | Coulometrics | |
| PC operating system | Windows 7 or higher | |
| Computer | Intel Core i3 / AMD Phenom or better | |
| Software | Athena | |
| Furnace Voltage | 2 x 24 V, 50/60 Hz | |
| Furnace power | 2 x 300 W | |
| Gas connector | 1/8” swagelok | |
| Gasses | O2 (99,6%) medical grade 2.6 Ar or He (99,998%) technial grade 4.8 |
|
| Gas pressure | 2 – 3 Bar (30-45 psi) | |
| Ambient temperature | 5 – 35 °C (41 – 95 °F) | |
| Regulatory compliance | ASTM, ISO | |
| Voltage | 115/230 V, 50/60 Hz | |
| Power | 1200W | |
| Dimensions | 960 (W) x 390 ( H) x 590 (D) mm 37,7 (W) x 15,4 ( H) x 23,2 (D) inches |
|
| Weight |
