Durable. Dependable. Design you can trust.
ASTM D1657 DENSITY OR RELATIVE DENSITY OF LIGHT HYDROCARBONS BY PRESSURE HYDROMETER
This test method covers the determination of the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325 kPa (14.696 psi).
IP 235 ISO 3993 DETERMINATION OF DENSITY OF LIGHT HYDROCARBONS – PRESSURE HYDROMETER METHOD
This method provides a procedure for determining the density of light hydrocarbons including liquefied petroleum gases. The prescribed apparatus should not be used for materials having vapour pressures higher than 14 bar at the test temperature.
The following accessories are recommended for purchase in sequential order (see eStore):
GASKET, pack of 10 pcs x1
Same as 1st year
Stainless steel structure, capacity 90 liters about, insulated interspace. The temperature control is a thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, cooling coil, motor stirrer, insulated double wall, safety internal level for low liquid with warning lamp. For 4 hydrometers.
– Temperature: from ambient to 90°C (194°F)
– Bath capacity: 90 liters about
– Power supply: 230V ±10% 50/60Hz
– Power: 3200W
– Dimensions: 54x50x89 cm
– Weight: 39 kg
POLYMETHYLMETHACRYLATE CYLINDER Ø50×36 mm, L=440 mm
MANOMETER 0-400 psi/2758 kPa
For ASTM D1657
THERMOHYDROMETER ASTM 310H 500-650 kg/m³, div.1, L=390 mm, ref. temperature 15°C, thermometer 0 +35°C div.0.5°
THERMOHYDROMETER ASTM 101H 0.500-0.650 sp g, div.0.001, L=360 mm, ref. temperature 60/60°F, thermometer 30 +90°F div.1°
For IP 235 ISO 3993
HYDROMETER 0.500-0.580 sp g, div.0.001, L=330 mm, ref. temperature 15°C
HYDROMETER 0.570-0.650 sp g, div.0.001, L=330 mm, ref. temperature 15°C
THERMOMETER BS593 B60C/TOTAL Scale -20 +60°C, div.0.2°, L=400 mm., total imm.
THERMOMETER ISO R653 Scale -15° +45°C