Robust by design

Three patented systems.
One compact analyzer.

1. PBT

   Peltier Boost Technology

   High-speed heating and cooling across the full measuring range.

2. CPT

   Contamination Prevention Technology

   Advanced electrode protection and a self-cleaning ignition system that minimize cleaning and maintenance.

3. PS

   Peltier separation

   Separated Peltier stages for stable thermoregulation in a smaller housing.

Compliance / Correlation

Portable enough for field.
Precise enough for lab.

ASTM D6450 · ASTM D7094

This device is fully compliant with ASTM D6450 and D7094 with a diverse array of correlation methods, making it the ideal solution for almost any flash point determination in both laboratory and on-the-go environments.

1. 01

   Temperature Range

   18 °C to 370 °C (64 °F to 689 °F), with no High Temperature Module or external cooling required.

2. 02

   Flash Point + Flash/No Flash

   Flash point corrected to sea level is displayed in units of temperature. In correlation tests: Flash versus No Flash determinations.

3. 03

   Pressure Change + Temperature

   Largest pressure difference during the flash test. Live, expected, and corrected temperatures.

Designed for the everyday user

Fully automated.
Pressurized by design.

This device is designed for the everyday user and is fully automated, with minimal operator interactivity.

A small footprint, navigable interface, rugged aluminum casing, and simple operations make the ERAVAP a desirable unit for both laboratory and on-the-go vapor pressure testing. Quick connect inlets paired with a pressurized cylinder ensure LPGs maintain a pressurized environment, retaining the sample from escaping due to its high volatility.

LPG applications + Compliance

System pressure.
Safety by design.

This device is fully compliant with ASTM D6897, making it the ideal unit for R&D, QC, and many more applications using a single analyzer. It also covers ASTM D5188, D5191, D6377, D6378, and EN 13016, so gasoline and crude oil methods run on the same instrument.

Key measuring parameters

Three signals.
One LPG profile.

1. 01

   Volatility

   DVPE/RVPE measurement describing the volatility profile.

2. 02

   Pressure Distribution

   Gas (Pgas), absolute (Pabs), and total (Ptot) pressure measurements for each sample, across a 0 to 2000 kPa range.

3. 03

   Vaporization Tendency

   V/L ratio gives insight into the tendency of fuel to vaporize in an engine.

Designed for the everyday user

Simple to operate.
Pressurized for accuracy.

This device is designed for the everyday user and is fully automated, with minimal operator interactivity.

A small footprint, navigable interface, rugged aluminum casing, and simple operations make the ERAVAP a desirable unit for both laboratory and on-the-go vapor pressure testing. Quick connect inlets paired with a floating piston cylinder (FPC) ensure live crude oil maintains a pressurized environment to retain its volatile components.

Crude-oil applications

Crude insight.
Built for better decisions.

This device is fully compliant with ASTM D6377, as well as ASTM D5188, D5191, D6378, and EN 13016, with an added density module incorporating ASTM D4052 and ISO 12185, making it the ideal unit for R&D, QC, and many more applications using a single analyzer.

Key measuring parameters

Four measurements.
One crude-oil profile.

1. 01

   Volatility

   DVPE/RVPE measurement describing the volatility profile.

2. 02

   Density

   Supplemental density (ρ) module provides m/v characteristics.

3. 03

   Pressure Distribution

   Gas (Pgas), absolute (Pabs), and total (Ptot) pressure measurements for each sample.

4. 04

   Vaporization Tendency

   V/L ratio gives insight into the tendency of fuel to vaporize in an engine.

Stacked Peltier cooling

A faster descent
into the cold.

The stacked Peltier design allows measurements according to ASTM D7094 with oven temperatures as low as −40 °C, and the cooling speed of the instrument was increased by approximately 35%. With ERAFLASH LT, simple low-temperature flash point testing is possible without the need to cool the equipment with dry ice or other substances.

ASTM D7094 · −40 °C to 120 °C

Controlled cooling

Cold surface.
Clear result.

• Auto-off coolant valve
• Condensation control
• Ambient-air shield

The ERAFLASH LT flash point tester is also equipped with a coolant valve that automatically shuts the coolant flow off if not needed. This helps to eliminate condensation of humidity on the cooler. Ice formation on the oven surface during the cool-down period is prevented by using a cooling cup that shields the surface from the ambient air.

High-resolution measurement

Accurate flow.
Real-time particle data.

Automatic digital flow rate determination behind every reading.

An automatic digital flow rate determination provides accurate measurement results. The PAMAS S50 counts particles with high resolution in eight particle size channels, available via the data interface for report in real time to the PC.

Precision + Range

Every channel.
Every reading counted.

The PAMAS HX volumetric sensor is calibrated to 4–70 µm(c) per ISO 11171, reading triple codes from 0/0/0 to 22/22/22 per ISO 4406 at a maximum particle concentration of 24,000 p/mL. Data transfers over a standard RS 485 interface, with an optional analog 4–20 mA interface available for condition monitoring.

Condition monitoring

Eight channels.
Early alerts.

1. 01

   Particle Monitoring

   Measures the particle number in eight different channels while providing early alerts.

2. 02

   Condition Monitoring

   May serve as an interface for condition monitoring, transferring four analog signals — 4–20 mA — to a PC.

3. 03

   PAMAS S50P

   An additional option with an integrated pump for flow control at a constant flow of 25 mL/min.

Built for high-volume analysis

Always on.
Operator-light.

This device is designed for high volume and constant analysis of fuel or crude oil RVP and is fully automated, with completely minimized operator interactivity.

Using multiple sample streams, the online unit maximizes measurement analysis for extremely fast and reliable testing. Its piston-based measurement principle requires no external vacuum pump, and repeatability of 0.3 kPa with a pressure resolution of 0.01 kPa keeps blending close to specification without quality giveaway.

Key measuring parameters

Three readings.
One reliable process.

1. 01

   Volatility

   DVPE/RVPE measurement describing the volatility profile.

2. 02

   Pressure Distribution

   Gas (Pgas), absolute (Pabs), and total (Ptot) pressure measurements for each sample.

3. 03

   Vaporization Tendency

   V/L ratio gives insight into the tendency of fuel to vaporize in an engine, variable from 0.02/1 to 100/1 for TVP determination.

Automated sample preparation

Prefill. Pressurize.
Measure. Relieve.

One programmed sequence, start to finish, without an operator in the loop.

The system can prefill the internal dead volume, pressurize the sample for a number of measurement runs, and relieve pressure at the end. For preparation, a pump including an air dryer is available to degas the sample with vacuum and to filter and dry the compressed air.

Precision + Range

One counter.
Three sensor options.

Three interchangeable sensor modules cover different needs: the standard PAMAS HCB-LD-50/50 spans 4–70 µm(c) per ISO 11171 (1–100 µm per ISO 4402, 1–200 µm per ISO 21501-3) at up to 24,000 P/mL; the PAMAS HCB-LD-25/25 covers the same size range at up to 120,000 P/mL for higher-concentration samples; and the PAMAS SLS-25/25 narrows to 1.5–25 µm(c) per ISO 11171 for fine-particle work. Counting runs across 8, 16, or 32 free-adjustable size channels, shown on a backlit 320×240 graphical display, with an integrated 32-column thermoprinter and data transfer over RS-232C.

Broad sample capability

High pressure.
High-viscosity samples.

1. 01

   Pressure

   Equipped with a liquid particle counter operating up to 10 bar.

2. 02

   Viscosity

   Measures liquid samples up to 1,600 cSt.

3. 03

   Sample Types

   Hydraulic oils, insulation and turbine oils, gear and motor oils, water-based hydraulic fluids, organic fluids and solvents, pharmaceutical fluids such as infusion solutions, water, and parenterals.

Watertight protection

Protected in harsh environments.
Ready for transportation.

A watertight steel case, built for what happens between sites.

The rugged case of the PAMAS GO electronic particle counter is watertight and protects the instrument in harsh environments and during transportation.

Precision + Range

Every particle.
Every environment.

A wear-resistant ceramic piston pump holds a constant flow across pressureless, low-pressure, and high-pressure sampling up to 420 bar (6000 psi). The PAMAS HCB-LD-50/50 volumetric sensor is calibrated to 4–70 µm(c) per ISO 11171 as standard, with an optional 2–100 µm calibration per ISO 4402, at a maximum particle concentration of 24,000 P/mL.

Reliable data access

High-resolution accuracy.
User-friendly data transfer.

1. 01

   Sensor Technology

   The incorporated, tried and tested PAMAS high-resolution sensor technology is trusted throughout the industry for its reliability and accuracy.

2. 02

   Data Transfer

   User-friendly download software transfers stored measurement data to a PC. Data files are compatible with most spreadsheet software.

3. 03

   Language Support

   Standard languages include English, German, Finnish, Dutch, French, Spanish, Portuguese, Chinese, and Russian. The system can also be programmed in another language as an option.

Automated optical analysis

546 photos.
One reliable result.

Advanced optics and algorithms in place of subjective visual assessment.

Designed to comply with ASTM D665, ASTM D7548, and NACE TM0172 standards, FeDDI eliminates subjective visual assessments with a high-resolution camera and fully automated process. In less than 6 minutes, 546 photos of the sample are gathered to create a composite image of 2.8 million pixels, resolving 0.035 mm per pixel. A four-step algorithm identifies and rates corrosivity, providing digital documentation and classification.

Connected + Documented

Every specimen scanned.
Every result recorded.

Equipped with Ethernet and USB interfaces, FeDDI integrates seamlessly with laboratory information management systems (LIMS), enabling easy data sharing and analysis. A 10.1″ LCD touchscreen for enhanced user interaction, and an easy-to-use NFX Handle ensures effortless sample handling and operation.

Key measuring parameters

Two measurements.
One complete rating.

1. 01

   Iron Corrosion Rating

   Iron corrosion ratings from A to E.

2. 02

   Corrosion Detection

   Corrosion detection from 0 to 100% with a precision of ±0.01%.

3. 03

   Test Standards

   ASTM D665, ASTM D7548, and NACE TM0172 standards.