+ 312.476.9292
Log In
Cart
eralytics-eravap-crude-oil zoom

eralytics-eravap-crude-oil-b zoom

eralytics-eravap-crude-oil-c zoom

eralytics-eravap-crude-oil-d zoom

eralytics-eravap-crude-oil
eralytics-eravap-crude-oil-b
eralytics-eravap-crude-oil-c
eralytics-eravap-crude-oil-d
Full Screen

ERAVAP CRUDE OIL

Accurate & precise testing for both dead and pressurized live crude oil.

Methods:
ASTM D2892, ASTM D323, ASTM D910, ASTM D1267, ASTM D4814, ASTM D4953, ASTM D5188, ASTM D5190, ASTM D5191, ASTM D6377, ASTM D6378, ASTM D6897, EN 13016-3, EN 13016-1, EN 13016-1-2,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								ASTM D2892, ASTM D323, ASTM D910, ASTM D1267, ASTM D4814, ASTM D4953, ASTM D5188, ASTM D5190, ASTM D5191, ASTM D6377, ASTM D6378, ASTM D6897, 
								
								
								
								
								
								
								
								EN 13016-3, EN 13016-1, EN 13016-1-2, 
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								

CRUDE OIL VAPOR PRESSURE TESTING AT ITS BEST

Crude oil vapor pressure testing is imperative when planning the transportation of crude oils through different climates. ERAVAP Crude is the solution for crude oil vapor pressure testing. This oil vapor pressure tester is expertly tuned for measuring live or dead crude according to standards such as ASTM D6377, IP481, and GOST 52340. Curve measurements cover a temperature range from -20 °C to 120 °C and a pressure range from 0 kPa to 1,000 kPa with excellent precision and measuring stability.

ERAVAP Crude comes with a pressure-tight connection inlet for quick fit connectors. These connectors make connecting floating piston cylinders (FPC) incredibly simple. The use of these cylinders is vital for measuring live crude oils still containing high amounts of volatiles. If such crudes are measured from an open bottle, the measured vapor pressure of this crude will be biased to the real vapor pressure since all volatiles within the crude will be lost.

ERAVAP Crude oil vapor pressure tester is also equipped with an inlet filter guarding the measurement cell against any sediments contained in the crude oil. With its built-in shaker motor, it measures in full compliance with ASTM D6377.

*To to improve measurement procedures to maximize safety in crude oil transportation, ERAVAP manufacturer Eralytics closely cooperates with Canadian Crude Quality Technical Association (CCQTA) and the American Crude Oil Quality Association (COQA), a partnership that resulted in the development of a device capable of measuring crude oil at a V/L ratio as low as 0.02/1.

To request a quote for the ERAVAP Crude Oil, please click here.

features__astm compliantfeatures__simple operatonfeatures_direct_lims_communicationfeatures__footprintfeatures__portablefeatures__high precisionfeatures__touch screen

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
No spare parts are required
2nd Year:
Sampling tube with Luer connector
Sampling tube 0,5m with Luer connector
Teflon o-ring for EV01-A002a Mesh inlet filter 80µ
Outlet tube
Kalrez O-ring for pressure sensor (Kalrez 12.42×1.78)
O-ring small for measuring cell cover (Viton 6×1.5)
Remaining Parts:

 

Available Test Methods   ASTM D5188, D5191, D6377, D6378, D6897, EN13016-1, EN13016-2, EN13016-3 ,IP394, IP409, IP481, JIS K2258-2, SHT 0769, SHT 0794, SNT 2932, GOST 52340 freely programmable methods EPA / CARB / US Military & NATO reference methods, TVP measurement VP-V/L Speed TestTM – Combined T(V/L) and vapor pressure measurement
Correlation to…   ASTM D323, D1267, D2533, D4953, D5190, D5482, D2879 (optional low vapor pressure extension)
Fuel Specifications   ASTM D910, D1655, D4814, D6227, EN 228
 
Temperature Range   0 °C to 120 °C (32 °F to 248 °F) with Peltier technology. No external cooling is required. -20 °C to 120 °C (-4 °F to 248 °F) with additional low temperature upgrade (EV01-COOL). External cooling is required. Extrapolated range: -100 to 300 °C (-148 °F to 572 °F)
Temperature Stability   0.01 °C (0.02 °F)
Pressure Range   0 kPa to 1 000 kPa (0 psi to 145 psi)
Pressure Resolution   0.01 kPa (0.0014 psi)
Vapor / Liquid Ratio   Variable from 0.02/1 to 100/1 Single-, multi-point and curve measurements
Precision   Repeatability: r ≤ 0.15 kPa (0.022 psi) / Cyclopentane @ 37.8°C Reproducibility: R ≤ 0.50 kPa (0.073 psi)
Available Extension Modules   EV01-COOL: Low temperature module (-20°C – 120°C / -4°F – 248°F) EV01-VISC: High viscosity module (Heated inlet and outlet up to 70°C / 158°F) EV01-LOW: Low vapor pressure module (r = 0.1 kPa; pressure resolution = 0.01 kPa)
Sample Introduction  

Automated via built-in piston Automated sample filtration through a reuseable 80 µm mesh filter No external vacuum pump is required
 

Sample Volume   1 mL (2.2 mL per rinsing cycle)
Measurement Time   5 minutes for a standard measurement
Cleaning   By next sample or solvent After crude oil samples cleaning with Toluene is advised
Measuring Chamber   Nickel-plated aluminum chamber
Display   Industry proven 8” color touch screen
Languages   English, German, French, Spanish, Russian, Chinese
Additional langages available upon request
Interfaces   Built-in PC with Ethernet, USB and RS232 interfaces
Direct LIMS connectivity via LAN, output to printer or PC as CSV or PDF
Optional input by external keyboard, mouse and barcode reader
Remote Control   Remote service capability via Ethernet interface
PC Software   ERASOFT RCS – remote control Windows® software for multi-instrument remote control, convenient data transfer, viewing spectra and result analysis
Result Database   Over 100,000 detailed test reports stored in internal memory
DVPE, RVPE, PABS, PGAS, PTOT, ASVP & AVP
Results can be marked for hazy appearance
Graphical view of curve measurements
Alarm Tracking   All alarm messages are stored in the database together with the result
Automated Calibration Routine   10-point probe offset correction table, calibration history tracking, substance calibration, self-diagnostics
Auto Sampler   Optional 10-position auto sampler – directly attached
Operating Conditions  

 

Temperature range 0°C to 50°C, Humidity up to 90% RH, non condensing

Power Requirements   Auto-switching 85-264 V AC, 47-63 Hz, max. 150 W (multi-voltage power supply)
Field application: 12 V DC (vehicle battery) adapter available
Model Number   EV10
Dimensions / Weight   29 x 35 x 34 cm (11.4 x 13.8 x 13.4 in) / 9.7 kg (21.4 lb)

Brochure: ERAVAP Crude Oil

Spanish brochure: ERAVAP Crude Oil

ASTM D6377

AYA-83-22034 High Viscosity Module
AYA-82-22237 Mesh inlet filter 80µ (5 pcs, 1 pc inside Sample inlet on an instrument)
AYA-82-22084 Outlet tube
AYA-82-22085 Waste container
AYA-82-22086 Power cable
AYA-82-22414 Quick-connector inlet nut for ERAVAP (EV10) and ERAVAP LPG (EV20)
AYA-82-22543 High pressure filling tube (0,7m) for EV10-REG and EV20-REG with 1 x Quick-connector with check valve
for pressures up to 70 bar (1000 psi)
   
AYA-83-22193 ERAVAP MPC module for sampling & measuring pressurized crude oil
for ERAVAP
or  
AYA-82-22439 ERAVAP FPC module for sampling & measuring pressurized crude oil and LPG
for ERAVAP
Categories:
, , , , , , , , , , , , , , , , , , , , , , , , , .
Tag:
.