Application knowledge, analytical precision
— from the scientists behind the instruments.
Moisture in Resin
This ASTM D6377-16 method uses the reaction of Iodine (I2) with water (Karl Fischer Reaction) to determine the amount of moisture in a polymer sample. This test method is intended to be used for the determination of moisture in most plastics.
Moisture in CBD Oils
This ASTM D6304 method covers the direct determination of water in the range of 10 mg/kg to 25 000 mg/kg entrained water in petroleum products and hydrocarbons using automated instrumentation.
Storage Tank Emissions
EPA’s Subpart Kc, effective 9/30/24, lowers tank vapor pressure thresholds to 10.3 kPa (20,000–40,000 gal) and 3.4 kPa (>40,000 gal), mandates 98% VOC control, annual LEL monitoring, and electronic reporting.
Gasoline Blending Application
ERAVAP ONLINE ensures precise, rapid RVP measurement for gasoline blending, optimizing profits, ensuring compliance, and minimizing costly off-spec products.
Online Vapor Pressure of Crude Oil
Precise vapor pressure measurement of crude oils using ASTM D6377-16 single expansion method. Eralytics Eravap ensures accurate results for dead and live crude oils in 5 minutes, optimizing refining, storage, and transport safety.
Oil Oxidation: Rancid Ravaging of Lubricant Systems
In-service lubricants degrade due to oxidation, causing increased viscosity, sludge, acid buildup, and deposits. This impairs friction protection, reduces demulsibility, clogs filters, and renders the oil unusable.
FoamDDI Application Note: Amine Foaming in Acidic Gas Systems
Foaming in amine systems for gas purification lowers efficiency, raises costs due to contaminants. Visaya’s FoamDDI automates foam testing, eliminates bias, and optimizes amine solutions with precise data.
Elemental Analysis Delineations Lubricant/Coolant/Fuel
Wear metals come from system wear, contaminants from external sources, and additives enhance performance. Element categories depend on formulation and use, with some elements shifting roles.
The Journey of Bakken Crude Oil from Extraction…
The Bakken Formation, a major shale oil region in North Dakota, Montana, and Canada, drives U.S. energy growth. This report covers its size, importance, development, processes, and key companies…
Oil Condition Monitoring Savings Calculations and Examples
Oil Condition Monitoring (OCM) extends oil change intervals, saving costs. For example, a facility with eight 410L machines saves $8,200 yearly by extending intervals two months. OCM detects faults early, boosts uptime, cuts waste…
ERAFLASH X: The Future-Proof Replacement for ASTM D93…
The ERAFLASH X by Eralytics revolutionizes flash point testing, surpassing ASTM D93 Pensky-Martens with faster, safer, and more precise results, using just 2 mL of sample across a wide 18°C to 370°C range.
ERAFLASH X: The Newest Addition to Eralytics Flash Point…
The ERAFLASH X (EFX10) is an economical flash point tester for petroleum distillates, offering a 18°C to 370°C range with 2 mL samples.
