Eraflash X Pensky-Martens Analyzer
Flash point tester with advanced Peltier Boost Technology (PBT).
Key Features:
- Small sample volume required
- Wide temperature range for various applications, ability of connecting to high temperature module (HTM) extension to increase the temperature range up to 420°C (788°F)
- Fast results and easy-to-use interface
- Portable and suitable for on-site testing
- Compliant with standards, safe and quick measurements
ASTM, D7094, IP
ERAFLASH X is the future-proof replacement for ASTM D93 Pensky-Martens testers. Tailored for the petroleum industry all kinds of liquids can be tested over the wide temperature range of 18 °C to 370 °C using only 2 mL of sample. The full compliance with the latest flash point standard ASTM D7094 brings 100% safety, unrivaled speed as well as best in class precision to your laboratory.
ERAFLASH X features eralytics’ patented PBT – Peltier Boost Technology® , which allows for unrivalled heating and cooling power and a wide temperature range of 18 °C to 370 °C (64 °F to 689 °F). In combination with the small sample volume, significantly shorter turnaround times are achieved compared to all other flash point testers on the market. With ERAFLASH X, a typical ASTM D7094 diesel measurement is performed in less than 12 min, which is two times faster than a traditional D93 Pensky-Martens test. This enables up to 5 complete flash point tests per hour with ERAFLASH X.
Based on the inherently safe CCCFP design, ERAFLASH X measures the flash point through pressure changes inside a continuously closed cup. In contrast to Pensky- Martens instruments, the ERAFLASH flash point tester series does not use an open flame, eliminating the risk of fire in your laboratory. Instead, 2 pins create an electric arc that is used to ignite the sample inside a closed chamber. Due to the small sample volume (2 ml) and the resulting low oxygen amount within the closed cup, the flame is automatically extinguished after ignition. The pressure increase in the closed cup following the ignition is used for the detection of the flash point. A pressure increase of ≥ 20 kPa is defined as a flash point by the method.
To request a quote for the ERAFLASH x, please click here
Features
ERAFLASH Flashpoint Tester is fully compliant with ASTM D396, D975, D2880, D3699, providing both standard method and refined methodology.
All eralytics analyzers use an intuitive menu structure that is easy to navigate. Samples need no prior preparation and measurements are done fully automated.
A direct out-of-the-box connection to LIMS (Laboratory Information Management System) is established with a standard Ethernet cable.No extra software or PC are necessary.
The small footprint of the eralytics instruments makes them the first choice for use in the lab and on-site.
The Eralytics units are all lightweight and built with an integrated carrying handle, they are versatile and ideally suited for mobile applications as well.
All Eralytics analyzer results are displayed immediately after the test on their large and user-friendly color touch screen.
Cleaning after measurements often took time and involved maintenance activities or replacing sensors or other elements of the chamber assembly. The ERAFLASH is different. Its innovative CPT-Contamination Prevention Technology TM, a combination of an advanced electrode protection and self-cleaning ignition system, reduces cleaning & maintenance to an absolute minimum.
The ERAFLASH’s innovative PBT – Peltier Boost Technology TM, a patented eralytics innovation, allows for previously unmatched heating and cooling rates. Paired with the conveniently small size of the sample cup this analyzer allows turnaround times that are significantly shorter than those offered by all other instruments available on the market.Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | No spare parts are required |
| 2nd Year: | D7094 Sample cup standard (aluminum, nickel plated, 2 ml) D6450 Sample cup standard (aluminum, nickel plated, 1 ml) Sample cup carrier Stirring magnet Disposable pipettes (5 pcs.) Brass eraser for cleaning of electrodes Cleaning tools for electrodes and oven surface (wet and dry sweeper) (5 pcs.) Ceramic ERAFLASH sample temperature sensor ERAFLASH oven temperature sensor |
| Remaining Parts: |
Specs
| Available Test Methods | ASTM D7094, IP 620 | |
| Fuel Specifications | ASTM D396, D975, D2880, D3699, D7467 | |
| PBT – Peltier Boost Technology® | High speed heating and cooling | |
| CPT – Contamination Prevention Technology™ | Advanced electrode protection and self-cleaning ignition system to minimize cleaning and maintenance | |
| QuickCal™ | In-situ calibration with eralytics unique calibration cups without the need of dismantling the instrument | |
| Fuel Dilution Program | Automatic fuel dilution measurement for the analysis of used engine oils | |
| Temperature Range | 18 °C to 370 °C (64 °F to 689 °F) | |
| Temperature Stability | 0.1 °C (0.2 °F) | |
| Turnaround Time | up to 5 tests per hour | |
| Sample Volume | 2 mL | |
| Reproducibility | R = 3.2 °C for diesel fuel at 60 °C (ASTM D93: R = 4.3 °C) R = 5.6 °C for lube oil at 200 °C (ASTM D93: R = 14.2 °C) |
|
| Result Database | Over 100 000 detailed test reports stored | |
| PC Software | ERASOFT RCS – Windows® software for convenient data transfer and result analysis | |
| Remote Control | Remote service capability via Ethernet | |
| Interfaces | Built-in PC with Ethernet, USB, and RS232 interfaces, Wi-Fi via USB dongle Direct LIMS connectivity via LAN and output to printer or PC |
|
| Display | Industry proven 5.7“ multilingual color touchscreen | |
| Languages | English, German, French, Spanish, Japanese, Chinese; additional langages available upon request | |
| Power Requirements | Auto-switching 85 – 264 V, AC 47 – 63 Hz, max 150 W, Field application: optional 12 V DC adapter | |
| Operating Conditions | Temperature range 10°C to 40°C, Humidity up to 90% RH, non-condensing | |
| Dimensions & Weight | W x D x H = 19.6 x 20.4 x 31.7 cm (7.7 x 8.0 x 12.5 in); 7.2 kg (15.9 lbs) |
Downloads
Download our brochure for more details
Configuration
ASTM D7094
| AYA-82-22040 | D7094 Sample cup standard (aluminum, nickel plated, 2 ml) |
| AYA-82-22044 | Sample cup carrier |
| AYA-82-22045 | Stirring magnet |
| AYA-82-22046 | Disposable pipettes (5 pcs.) |
| AYA-82-22047 | Brass eraser |
| AYA-82-22056 | Cleaning tools for electrodes and oven surface |
| AYA-82-22086 | Power cable |
ASTM D6450
| AYA-82-22041 | D6450 Sample cup standard (aluminum, nickel plated, 1 ml) |
| AYA-82-22044 | Sample cup carrier |
| AYA-82-22045 | Stirring magnet |
| AYA-82-22046 | Disposable pipettes |
| AYA-82-22047 | Brass eraser |
| AYA-82-22056 | Cleaning tools for electrodes and oven surface |
| AYA-82-22086 | Power cable |
Tags
eStore
You May Also Like
-
500mL Anisole & n-Decane Flash Point Standards
$307.77 -
Brass eraser
$60.00 -
Case latch
$50.00 -
Ceramic
$110.00 -
D6450 Sample cup standard
$89.91 -
DC Adapter
$740.00 -
ERAFLASH
-
ERAFLASH S10
-
Eralytics Flashpoint Cooling Cup
$170.00 -
Glass syringe 20 ml
$160.00 -
Laboratory Cleaning Brushes for Electrodes
$100.00 -
Oven temperature sensor
$220.00 -
Peltier element
$240.00 -
Disposable Pipettes
$17.01 -
Protective film for touch display
$61.00 -
Sample cup carrier
$714.42 -
Sample temperature sensor
$220.00 -
Standard D7094 2mL Sample Cup
$89.91 -
Stirring Magnet
$17.01 -
Stylus for data entry via touch display
$70.00
