Automated Pensky-Martens Closed Cup Flash Point Tester apm-100
Efficient and safe tester for closed cup flash point analysis.
Key Features:
- Accurate and safe flash point determination.
- Automated operation for consistent results.
- Easy-to-navigate interface with advanced features.
- Durable design for various testing environments.
- Compliant with ASTM and ISO standards.
ASTM, D93, ISO, 2719
APM-100 Automated Pensky-Martens Closed Cup Flash Point Tester
The APM-100 is the newest automated Pensky-Martens Closed Cup flash point tester from Tanaka, designed as part of the cutting-edge 8th generation lineup. Backed by over 45 years of expertise in flash point testing innovation, the APM-100 delivers exceptional performance with a focus on being ergonomic, versatile, and premium in every detail.
Key Features:
-
User-Friendly Operation: A high-visibility, color-coordinated display and intuitive switch layout support universal design and effortless navigation.
-
Enhanced Versatility: Equipped with a USB port for optional flash memory or external keyboard, password protection, and built-in data storage for secure and flexible operation.
-
Integrated, Compact Design: Features an all-in-one chassis that is lightweight, space-efficient, and visually refined for modern laboratory environments.
-
Premium Aesthetic: The sleek exterior complements its robust functionality—delivering professional-grade performance with style.
Engineered for today’s demanding laboratories, the APM-100 redefines convenience and reliability in flash point testing.
Features
AUTOMATED PENSKY-MARTENS CLOSED CUP FLASH POINT TESTER model apm-8 is fully compliant with ASTM D93, providing both standard method and refined methodology.
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.
The unit is equipped to store up to 200 test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.
Automatically shuts off and the problem is reported by buzzer and display, in case: (a) EFP+20 oC or 370 oC is reached, (b) temperature sensor is found defective, (c) flash detector is found defective, (d) thermofuse is blown, (e) electric Igniter is blown, (f) built-in battery is found drained out, (g) test cover is not set in place, (h)control computer runs away (no display) (i) Stirring motor stopped
Automatically shuts off and the problem is reported by buzzer and displayAccessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | Thermofuse (pack of 5) Electric igniter Temperature sensor Flash detector Printer paper |
| 2nd Year: | Test cup assembly |
| Remaining Parts: |
Specs
| Test standards | IP34, ASTM D93, SO 2719 | |
| Type | All in one microprocessor controlled | |
| Measuring range | Ambient to 370 | |
| Ambient temp range | 10°C to 35°C | |
| Temperature sensor | PT-100 in stainless steel sheath | |
| Measurements Modes | ASTM D93 A-normal, ASTM D93 A-SPE (search), ASTM D93 B-normal, ASTM D93 B-SPE (search), ASTM D93 C-normal, ASTM D93 C-SPE (search) and User custom | |
| Display | 5.7 inch (117 x 88mm) color LCD with LED back ligh | |
| Heater | Band type heater:530W at 115V or 500W at 230V | |
| Cooling device | Forced air cooling by fan | |
| Stirring | 100, 250 rpm (selectable) | |
| Flash detector | CRC Thermocouple | |
| Ignition source | Gas ignition with automatic lighting or electric ignition. Interchangeable | |
| Barometric correction | Automatic correction by built-in barometric pressure sensor | |
| I/O port | RS-232C = 1 channel (for PC or Optional Printer) USB=1 channel (for USB keyboard or USB Flash Memory) | |
| Gas supply (When gas ignition is used) |
LP gas or natural gas (Max. pressure:10kPa) | |
| Safety shutdown | Automatically shuts off and the problem is reported by buzzer and display, in case: (a) EFP+20°C or 370°C is reached, (b) temperature sensor is found defective, (c) flash detector is found defective, (d) thermofuse is blown, (e) electric Igniter is blown, (f) built-in battery is found drained out, (g) test cover is not set in place, (h)control computer runs away (no display) (i) Stirring motor stopped |
|
| Electricity consumption | 160Wh for 1 test (about 20 min), 60.48gCO2 (at 0.378kg CO2/1kWh) | |
| Power consumption | 720W max | |
| Power supply | 100/120VAC or 220/240 VAC, 50/60Hz | |
| Weight | 17 kg (37 lbs) | |
| Dimension | 23x47x39 cm (9x18x15 inches) |
Brochure
Download our brochure for more details
Tags
Related
Related Products
-
Automated Aniline Point Tester
-
Air Chamber Baths for Brookfield Viscosity at Low Temperatures
-
CuDDI – Copper Digital Detection Imaging
-
Automated Cold Filter Plugging Point Tester AFP-300
-
EVAPORATION GUM BATH “AIR AND STEAM JET”
-
Programmable Liquid Visibility Bath for Brookfield Viscosity at Low Temperatures
-
ERASPEC OIL
-
Automated Aniline Point Tester aap-6
