+ 312.476.9292
Log In
ph-aap6 zoom

Full Screen

Automated Aniline Point Tester aap-6

Covers samples from transparent to opaque.
ASTM D611, ASTM D2977, ISO ISO2917,

								ASTM D611, ASTM D2977, 
								ISO ISO2917, 

Durable. Dependable. Design you can trust.

Conforming to ASTM D611 and ISO 2977, the Tanaka AAP-6 automates the aniline point test of petroleum products. Using a specialized infrared detector, the automatic aniline point tester is capable of testing a wide range of samples, from transparent to opaque, including residual fuels that rank up to 8.0 on the ASTM Color Scale. The latest in the Tanaka family of flash point testers, the AAP-6 boasts an easy operation, safer handling of toxic aniline and compact design.

Easing safety hazard concerns, a bottle top dispenser allows for easy connectivity to the measuring cell and eliminates the need for a manual pipetting operation.

The instrument’s removable measuring cell allows for both weighing of viscous samples that are solid at ambient temperature as well as cleaning without disassembly. Like similar Tanaka flash point testers, the AAP-6’s compact design consists of a test head component and separate control unit, allowing it to fit easily inside a fume hood.See

See Options tab for a wide range of available automatic analine point apparatus selections.

Additional Information

Weight 15 lbs
Dimensions 230 x 455 x 685 in

features__astm compliant

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
Temperature sensor
Printer paper
Measuring cell
2nd Year:
Same as 1st year
Remaining Parts:
Conforming standards    ASTM D611,  ISO 2977
Samples    Transparent or opaque/dark (<8.0 on ASTM color scale)
Measuring range   Ambient to 170°C (338°F) For sub-ambient, use the optional water jacketed measuring cell and a cryostat.
Temperature sensor    PT-100 in stainless steel sheath
Aniline point sensor    Photo-electric cell, with special detection circuitry
Measuring cell    Modified U-Tube type. Vacuum jacketed glass cell
with TFE stopcock at the bottom for drainage.
Display    Vacuum fluorescent display (VFD)
Heater    Immersion heater in stainless steel sheath: 20W
Sequense control    By an on-board microcomputer
Test mode    Single or repeated determinations (2 kinds, average is reported to nearest 0.05°C)
Data output    RS-232C 1 channel (for PC or Optional Printer)
Safety mechanism    Automatically shuts off and the problem is reported
by buzzer and display, in case:
(a) EAP+10oC or at 170oC is reached,
(b) Temperature sensor is found defective,
(c) Light projector or receiver is found defective
(d) Control computer runs away (no display)
Installation site    Ambient temperature: 0 to 40°C
RH: Less than 90%(no condensation)
Power supply    AC100/120V or 220/240V 50/60Hz
(set at the factory) 0.1kW(max.)
Weight    Control unit 7 kg (15 lbs)
Test unit 8 kg (17 lbs)
Dimension    Control unit 23x45x10 cm (9x17x4 inches)
Test unit 23x35x58 cm (9x13x22 inches)


, , , , , , , .
SKU: 89.0270-1.