Automated Aniline Point Tester
Accurate tester for determining the aniline point of various substances.
Key Features:
- Accurate aniline point measurement.
- Automated system for consistent results.
- User-friendly interface with minimal maintenance.
- Reliable performance under various conditions.
- Compliant with ASTM standards.
ASTM, D611, D2977, ISO, ISO2917
Conforming to ASTM D611 and ISO 2977, the Tanaka AAP-5 automates the aniline point test of petroleum products. Using a specialized infrared detector, the automatic analine point apparatus is capable of testing a wide range of samples, from transparent to opaque, including residual fuels that rank up to 8.0 on the ASTM Color Scale. The latest in the Tanaka family of aniline point testers, the AAP-5 boasts an easy operation, safer handling of toxic aniline and compact design.
Easing safety hazard concerns, a bottle top dispenser allows for easy connectivity to the measuring cell and eliminates the need for a manual pipetting operation.
This aniline point tester's removable measuring cell allows for both weighing of viscous samples that are solid at ambient temperature as well as cleaning without disassembly. Like similar Tanaka flash point testers, the AAP-5's compact design consists of a test head component and separate control unit, allowing it to fit easily inside a fume hood.
See Options tab for a wide range of available automatic analine point apparatus selections.
Features
Automated Aniline Point Tester Model AAP-5 is fully compliant with ASTM D611, ASTM D2977, providing both standard method and refined methodology.
Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | Temperature sensor Printer paper Measuring cell |
| 2nd Year: | Same as 1st year |
| Remaining Parts: |
Specs
| Conforming standards | ASTM D611, ISO 2977 | |
| Samples | Transparent or opaque/dark (<8.0 on ASTM color scale) | |
| Measuring range | Ambient to 170°C (338°F) For sub-ambient, use the optional water jacketed measuring cell and a cryostat. | |
| Temperature sensor | PT-100 in stainless steel sheath | |
| Aniline point sensor | Photo-electric cell, with special detection circuitry | |
| Measuring cell | Modified U-Tube type. Vacuum jacketed glass cell with TFE stopcock at the bottom for drainage. |
|
| Display | Vacuum fluorescent display (VFD) | |
| Heater | Immersion heater in stainless steel sheath: 20W | |
| Sequense control | By an on-board microcomputer | |
| Test mode | Single or repeated determinations (2 kinds, average is reported to nearest 0.05°C) | |
| Data output | RS-232C 1 channel (for PC or Optional Printer) | |
| Safety mechanism | Automatically shuts off and the problem is reported by buzzer and display, in case: (a) EAP+10oC or at 170oC is reached, (b) Temperature sensor is found defective, (c) Light projector or receiver is found defective (d) Control computer runs away (no display) |
|
| Installation site | Ambient temperature: 0 to 40°C RH: Less than 90%(no condensation) |
|
| Power supply | AC100/120V or 220/240V 50/60Hz (set at the factory) 0.1kW(max.) |
|
| Weight | Control unit 7 kg (15 lbs) Test unit 8 kg (17 lbs) |
|
| Dimension | Control unit 23x45x10 cm (9x17x4 inches) Test unit 23x35x58 cm (9x13x22 inches) |
Tags
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.