+ 312.476.9292
Log In
Cart
atg-8 zoom

atg-8
Full Screen

Automated Tag Closed Cup Flash Point Tester

Ergonomic, versatile and premium, all in one.
Methods:
ASTM D56, IP 304, ISO 2719,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								ASTM D56, 
								
								
								
								
								
								
								
								
								
								
								
								
								
								IP 304, 
								
								ISO 2719, 
								
								
								
								
								
								
								
								

Durable. Dependable. Design you can trust.

Model atg-8 series is the automated Tag Closed Cup flash point tester from Tanaka. Based on 45 years experience of manufacturing the automated flash point testers, the innovative 8th generation series has been released. The theme of this generation of tag flash point tester is Ergonomic, Versatile and Premium.

The atg-8 closed cup flash-point tester for DOT has been designed for ease of use with a color-coordinated display for high visibility as well as a universal design and intuitive switch operation. This Tag closed cup tester provides enhanced versatility including a usb port for optional flash memory or a keyboard, it also is secured with password protection and data storage. All-in-One Chassis Design: Compact, Light-Weight and Premium Exterior Design.

features__astm compliantfeatures__simple operatonfeatures__result managerAuto Shut-offSafety Alarms

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
Thermofuse (pack of 5)
Electric igniter
Temperature sensor
Flash detector
Printer paper
2nd Year:
Test cup assembly
Remaining Parts:
Test standards     ASTM D56, IP 304
Type    All in one microprocessor controlled 
Measuring range    Ambient to 95
Temperature sensor    PT-100 in stainless steel sheath
Measurements Modes    ASTM CRM, ASTM Normal, ASTM SPE (search), ASTM Rapid and User custom
Display    5.7 inch (117 x 88mm) color LCD with LED back ligh
Heater    Band type heater:530W at 115V or 500W at 230V
Cooling device    Forced air cooling by fan
Stirring     100, 250 rpm (selectable)
Flash detector    CRC Thermocouple
Ignition source    Gas ignition with automatic lighting or electric ignition. Interchangeable
Barometric correction    Automatic correction by built-in barometric pressure sensor
I/O port    RS-232C = 1 channel (for PC or Optional Printer) USB=1 channel (for USB keyboard or USB Flash Memory)
Gas supply 
(When gas ignition is used)
  LP gas or natural gas (Max. pressure:10kPa)
Safety shutdown    Automatically shuts off and the problem is reported by buzzer and display, in case: 
(a) EFP+10°C or 95°C is reached, 
(b) temperature sensor is found defective, 
(c) flash detector is found defective, 
(d) thermofuse is blown, 
(e) electric Igniter is blown, 
(f) built-in battery is found drained out, 
(g) test cover is not set in place, 
(h)control computer runs away (no display) 
(i) Stirring motor stopped
Electricity consumption    40Wh  for 1 test (about 30 min), 15.12gCO2 (at 0.378kg CO2/1kWh) 
Power consumption    720W max 
Power supply    100/120VAC or 220/240 VAC, 50/60Hz
Weight    17 kg (37 lbs)
Dimension    23x47x39 cm (9x18x15 inches)

Brochure: atg-8

Categories:
, , , , , , , , , .