+ 312.476.9292
Log In
Cart

FOAMING DEMULSIBILITY AND FOAMING

Methods:
ASTM D892, ASTM D3427, ASTM D6082, DIN 51 566, IP 146, ISO 6247,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								ASTM D892, ASTM D3427, ASTM D6082, 
								
								
								
								
								
								DIN 51 566, 
								
								
								
								
								
								
								
								IP 146, 
								
								ISO 6247, 
								
								
								
								
								
								
								
								

Designed with assurance.

Consists of a tank fitted with cover with two hole, which allows two cylinders to get through, and a cooling coil, leakage protection vessel made of tempered glass supplied with cork disk supporting and stainless steel base. Stainless steel control box on the cover, temperature controlled by digital thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, cooling coil for improved control near to ambient temperature, motor stirrer, safety internal level for low liquid with warning lamp. Plate base painted with anti acid epoxy products with rack for 2 flowmeters 25-250 ml/ min. Complete with: 2x flowmeters, 2x graduated cylinders, 2x diffuser ball-shape, 2x rubber plug and diffuser tubes.

features__astm compliant

Models    Positions
Model 1900/2   FOAMING BATH LIQUID MODEL (2 POSITIONS)
Model 1900/4   FOAMING BATH LIQUID MODEL (4 POSITIONS)
Model 1900/AIR/2   FOAMING BATH AIR MODEL (2 POSITIONS)
Model 1900/AIR/4   FOAMING BATH AIR MODEL ( POSITIONS)

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
GRADUATED CYLINDER, 1000 ml. x2
DIFFUSER BALL-SHAPE x2 Made of alundum
2nd Year:
Same as 1st year
Remaining Parts:
CERTIFIED DIFFUSER BALL-SHAPE Made of Alundum
DRYING TOWER, 300 mm 20-mm layer of cotton, 180-mm layer of indicating desiccant, 20-mm layer of cotton
EMPTY DRYING TOWER, 300 mm
AIR VOLUME METER 1-60 l/h
GAS VOLUME METER 5-360 l/h
DIFFUSER TEST APPARATUS For maximum pore diameter and permeability diffusers. Consisting of: U-tube manometer, gas volume meter 5-360 l/h, 500 ml vacuum flask, 250 ml cylinder, needle valve
PUMP
DIGITAL STOPWATCH 7 digit LCD, max.10 hours, 1/100 sec, digit h=8 mm
THERMOMETER ASTM 12C IP 64C
THERMOMETER ASTM 41C IP 81C
DIFFUSER TUBE, pack of 2 pcs
RUBBER STOPPER, pack of 2 pcs
FLOWMETER
PROBE PT100A
HEATER (for bath 24°C)
HEATER
LEVEL SWITCH
DIGITAL THERMOREGULATOR
STATIC RELAY
BIPOLAR GREEN SWITCH
BIPOLAR YELLOW SWITCH
MOTOR STIRRER
Test Method Compliance   ASTM D892 ASTM D6082 DIN 51566 IP 146 ISO 6247 
    FOAMING BATH LIQUID MODEL (2 POSITIONS)
Temperature   from ambient to +150°C (302°F)
Stability   ±0.1°C
Capacity   about 23
Power supply   230V ±10% 50/60Hz
Power   2200W
    FOAMING BATH LIQUID MODEL (4 POSITIONS)
Temperature   from ambient to +150°C (302°F)
Stability   ±0.1°C
Capacity   about 23+23
Power supply   230V ±10% 50/60Hz
Power   1200+2200 W
Weight   65 kg 
 Dimensions   76x50x77 cm
    FOAMING BATH AIR MODEL (2 POSITIONS)
Temperature   from ambient to +150°C (302°F)
Stability   ±0,5°C
Power supply   230V 50/60Hz
Power   2200W
    FOAMING BATH AIR MODEL (4 POSITIONS)
Temperature   from ambient to +150°C (302°F)
Stability   ±0,5°C
Power supply   230V 50/60Hz
Power   2200W
Shipping weight    
Dimensions with crate    

 

Categories:
, , , , , , , , , , , .