Designed with certitude.
The oil oxidation test apparatus has a 6-positions oil bath with a double bottom. The oxidation stability test also has a stainless-steel structure with insulation double wall, cover with 6 holes as well as support for the flowmeters and absorption tubes. Temperature regulation for the oxidation stability test is controlled by a digital thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, motor stirrer, safety internal level for low liquid with warning lamp, drain cock.
The following accessories are recommended for purchase in sequential order (see eStore):
COPPER CATALYST, pack of 5 pcs x4
SILICON CARBIDE ABRASIVE CLOTH 100 GRIT, pack of 25 m x2
SILICON CARBIDE ABRASIVE CLOTH 220 GRIT, pack of 25 m x2
Same as 1st year
DRECHSEL HEAD With inlet tube
HEATER (for oil bath)
HEATER (for dry bath)
BIPOLAR GREEN SWITCH
BIPOLAR YELLOW SWITCH
OXIDATION/ABSORPTION TUBE Borosilicate glass Ø26×210 mm with Drechsel head and inlet tube 24/29 ground joint The test mehod “B” and “C” required two oxidation tube
CONNECTION SET For connections the oxidation tube and absorption tube and flowmwter. Consisting of: 3 m silicone tube and 10 glass tubing.
FLOWMWTER 0.6-4 l/h For oxygen at 1 l/h For methods: ASTM D2440, IP 280, IP 306, IP 307, IP 335, EN 61125-A EN 61125-B
FLOWMETER 0.1-1.55 l/h For air at 0.15 l/h For method: EN 61125-C
FLOWMETER 2.5-25 l/h For air at 15 l/h For method: IP 48
SOAP BUBBLE FLOWMETER
Graduated from 0 to 10 ml
REDUCER MANOMETER FOR O2 Cylinder fitting
REDUCER MANOMETER FOR AIR Primary 0-250 bar, reducer 0-1 bar
COPPER CATALYST, pack of 5 pcs L=3 m., (not necessary for IP 48)
SILICON CARBIDE ABRASIVE CLOTH 100 GRIT, pack of 25 m (not necessary for EN 61125)
SILICON CARBIDE ABRASIVE CLOTH 220 GRIT, pack of 25 m (not necessary for EN 61125)
SILICONE OIL 20 cSt pack of 25 kg For temperature from ambient to 120°C (248°F)
SILICONE OIL 50 cSt, pack of 25 kg For temperature from 100°C (212°F) to 200°C (392°F)
PORCELAIN CRUCIBLE, pack of 5 pcs 50 ml
BURETTE 10 ml., div.0.01 ml.
FILTER FUNNEL 125 ml.
ANALYTICAL BALANCE Range 220 g., readout 0.0001, pan Ø80
DIGITAL STOPWATCH 7 digit LCD, max.10 hours, 1/100 sec, digit h=8 mm
THERMOMETER IP22C For method IP 48
THERMOMETER ASTM 9C IP 15C For method IP 280, IP 307, IP 335
THERMOMETER ASTM 40C IP 80C For method IP 307, IP 335, EN 61125-A,
THERMOMETER ASTM 41C IP 81C For method ASTM D2440, IP 280, IP 306, IP 335, EN 61125-B, EN 61125-C