+ 312.476.9292
Log In
Cart

COLD FILTER PLUGGING POINT

Methods:
ASTM D6371, DIN 51 428, EN 116, IP 309,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								ASTM D6371, 
								
								
								
								
								
								DIN 51 428, 
								
								EN 116, 
								
								
								
								
								
								IP 309, 
								
								
								
								
								
								
								
								
								
								

Designed with assurance.

COLD FILTER PLUGGING POINT – CFPP
PVC structured CFPP test fitted with: dewar flask with cover, brass jacket Ø48×115 mm outside, test jar Ø31×125 mm flat bottomed and mark at 45 ml level, insulating ring thickness 6 mm, to be placed in the bottom of the jacket, two spacers to be placed as around the test jar to provide insulation for the test jar from
the sides of the jacket, a supporting ring for suspend the jacket, a pipet with a calibration mark corresponding to a contained volume of 20 mL at a point 149 mm from the bottom of the pipet, a metallic unit filter, a stopper with three holes one for thermometer one for pipet and one for vent, two 5 liters bottle with stopper, stopcock and U-manometer.

SEM SEMI-AUTOMATIC COLD FILTER PLUGGING POINT APPARATUS
Resistant cold filter plugging point apparatus painted with anti-acid epoxidic products, fitted with 4 wheels with brake. Glossy-black PVC cover with small stand-by covers aluminium block with 1 hole for accommodate the test jar, equipped with a hole where the thermometer is placed, heating element controlled by a independent switch for a quick return to a ambient temperature. Temperature is controlled by digital thermoregulator fitted with a probe PT100 A. Automatic defrosting device under the cover, earth leakage circuit breaker, double stage compressor CFC free refrigerant gases are used. Brass jacket Ø48×115 mm outside, test jar Ø31×125 mm flat bottomed and mark at 45 ml level, insulating ring thickness 6mm, to be placed in the bottom of the jacket, two spacers to be placed as around the test jar to provide insulation for the test jar from the sides of the jacket, a supporting ring for suspend
the jacket, a pipet with a calibration mark corresponding to a contained volume of 20 mL at a point 149 mm from the bottom of the pipet, a metallic unit filter, a stopper with three holes one for thermometer one for pipet and one for vent, two 5 liters bottle with stopper, stopcock and U-manometer.

features__astm compliant

Models    Positions
Model 2540   COLD FILTER PLUGGING POINT – CFPP
Model 2540/SEM   SEMI-AUTOMATIC COLD FILTER PLUGGING POINT – CFPP

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
TEST JAR, 45 ml x2
FILTER DISK, pack of 5 pcs x4
O-RING FOR THE FILTER SIEVE, pack of 5 pcs x1
O-RING FOR PIPETTE, pack of 5 pcs x1
2nd Year:
Same as 1st year
Remaining Parts:
VACUUM PUMP
DIGITAL STOPWATCH7 digit LCD, max.10 hours, 1/100 sec, digit h=8 mm
THERMOMETER ASTM 5C IP 1C
THERMOMETER ASTM 6C IP 2C x2
U-MANOMETER
SPACE
BRASS JACKET
PIPET
FILTER UNIT
STOPPER FOR PIPET
3-WAY GLASS STOPCOCK
GLASS BOTTLE, 5 l
2 HOLES STOPPER FOR BOTTLE
3 HOLES STOPPER FOR BOTTLE
GLASS LINK, pack of 4 pcs
AIR VENT TUBE FOR BOTTLE
DEWAR
Test Method Compliance   ASTM D6371 IP 309 EN 116 DIN 51428
    COLD FILTER PLUGGING POINT – CFPP
Weight    Weight: 9 kg
Dimensions   330×500 mm (Øxh)
    SEMI-AUTOMATIC COLD FILTER PLUGGING POINT – CFPP
Temperature   from ambient to -70°C (-94°F)
Power supply   230V ±10% 50Hz
Power   1300W
Weight   118 kg
Dimensions   60x70x160 cm
Shipping weight    
Dimensions with crate    

 

Categories:
, , , , , , , , , .