Aquamax Plus Karl Fischer Titrator
Advanced titrator for accurate water content determination.
Key Features:
- High precision in measuring water content.
- User-friendly interface with automated titration.
- Fast and efficient sample processing.
- Compact and portable design.
- Compliant with various Karl Fischer standards.
ASTM, D1533, D3401, D4672, D4928, D6304, D7933, D890, D1364, D1631, D4017, D5530, D6869, IP, 356, 386, 438, ISO, 10101-3, 12937, 10337
Designed to be flexible and easy to use, the Aquamax KF Plus is the solution to all of your water Coulometric Karl Fischer titration equipment needs. Suitable for a wide range of applications, the Aquamax Karl Fischer titrator is compliant with ASTM D1533/D4928/D6304, IP 386/438 and ISO 10101-3/10337/2937. This model also features a simple to program interface, meaning that titrations can be calculated with the push of a button on the Aquamax Plus!
Easy to assemble and disassemble, Aquamax Plus titration equipment is portable and flexible, making it easy to add assessors to measure the water content of oils and solids. All GR Scientific titration equipment includes the Low Drift Cell glassware pack, comprising of the generator electrode, detector electrode, desiccant tube and all necessary leads, septa, caps and fittings. All units provide the choice of generator electrodes, with or without frit and complete with an electrode locking system. This locking system allows joints to seal completely without the use of grease or PTFE sleeves, making the instrument flexible while providing an improved baseline stability.
Our proprietary Results Manager software package, which comes equipped with every Karl Fischer titrator, allows you to view your results on a PC spreadsheet or print them for easy reporting. The device also features a removable flash drive that can be connected to a PC. Results manager comes with all the necessary cables and connections, as well as the installation CD and user manual. Also included is a 42 character high speed thermal printer with two single thermal paper rolls.
In addition to the above features, the Aquamax Karl Fischer titrator also comes equipped with a gas tight 1.0 mL syringe, a 19 gauge Luer Needle, polypropylene funnel and titration vessel to make sample administration easy. A stirrer bar compatible with the microprocessor controlled stirrer makes sample preparation a breeze.
Features
Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | Cou-Lo Formula Reagents Septas Desiccant Tube LDC + cap Paper Rolls (Thermal) |
| 2nd Year: | Electrode Lead Gas Tight Syringe Generator Electrode |
| Remaining Parts:/td> | Dust Cover Carry Case Mains Power PackComplete Twin Port LDC glassware set Titration Vessel LDC Detector Electrode LDC Generator Electrode + frit LDC Generator Electrode – frit LDC Electrode Lead Desiccant Tube LDC + cap Pack Injection Septa (Pack of 10) Gas Tight Syringe 0.25ml Gas Tight Syringe 1.0ml Gas Tight Syringe 5.0ml Luer Needle Pair (17 & 19 gauge, one each) Powder Sampler Molecular Sieve Stirrer Bar Funnel Paper Rolls (thermal) single Multi pack 20 paper rolls Gas Analysis Kit Glassware Box (Plastic) 18mm Cap with aperture 18mm Silicon rubber “O” ring 29/32 Generator cap 29/32 Silcon rubber “O” ring 29/32 Loosening ring 14/23 Detector cap 14/23 Silicon rubber “O” ring 14/23 Loosening ring |
Specs
| Titration Method | Coulometric Karl Fischer titration | |
| Electrolysis Control | Patented “ACE” control system GB2370641 | |
| End Point Detection | AC polarisation | |
| End point indication | Visual display/print out/acoustic beep | |
| Titration vessel | Low Drift Cell design, no grease or PTFE sleeves required | |
| Measuring range | Possible 1μg – 200mg water Typical 1μg – 10mg water |
|
| Moisture range | 1ppm – 100% water | |
| Max. sensitivity | 0.1μg | |
| Max. titration speed | 2.24 mg per minute | |
| Max. current | 400 ma | |
| Drift compensation | Automatically controlled | |
| Precision | 10-100μg ± 3μg, 100μg-1mg ±3μg, above 1mg ±0.3% |
|
| Start delay time | 0-30 minutes, user selectable | |
| End delay time | 0-30 minutes, user selectable | |
| Calculation modes | Weight/weight, (W/w) (user programmable) Weight/dilution ratio, (W/K) Volume/density, (V/SG) Volume/volume, (V/v) |
|
| Display format | μg, mg/kg, ppm, % | |
| Print format | μg, mg/kg, ppm, % | |
| Statistics | max, mean, min values up to 99 runs | |
| Method storage | 10 user programmable methods | |
| Sample ID number | User programmable | |
| Stirrer speed | Microprocessor controlled | |
| Languages | Multi languages – user selectable | |
| Calendar/clock | Analysis time & date print out | |
| Battery low indicator | Display & print out indication | |
| Data outputs | USB and RS232 ports | |
| Removable Data storage | Flash drive (memory stick) | |
| Data Entry | 15 key touchpad | |
| Display | 40 character alphanumeric backlit LCD | |
| Printer | 42 character high speed thermal printer | |
| Power supply | 90-264V AC, 47-63 Hz. 12V DC car adapter/internal battery |
|
| Dimensions | 250x245x120 mm | |
| Weight | 3.5 kg |
