This water washout test for grease is made of stainless steel with a thermostatic cabin with electric stainless steel heater controlled by a digital thermoregulator, digital timer, two bearings type 6204, a thermometer determining water temperature in the cabin, an electric motor with direct coupling to the pump and drive belt for the shaft pulley 600 rpm, a bearings block, a flowmeter measuring water delivery, delivery and back-flow gates with by-pass and regulator valves.Request a quote for this water washout test for grease online.
Features
Water Washout is fully compliant with ASTM D1264, providing both standard method and refined methodology.Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | No spare parts are required |
| 2nd Year: | No spare parts are required |
| Remaining Parts: |
Specs
| Test Method Compliance | ASTM D1264, IP 215 | |
| Temperature Ambient | To 90°C (194°F) | |
| Stability | ±1°C | |
| Power Supply | 220V 50/60Hz | |
| Power | 900W | |
| Weight | 39 kg (85 lbs) | |
| Dimensions | 58x39x65 cm (22x15x25 inches) | |
| Shipping weight | ||
| Dimensions with crate |
