Automated CFPP Tester
Advanced instrument for determining the cold filter plugging point (CFPP).
Key Features:
- High precision in cold filter plugging point (CFPP) measurement.
- Automated and user-friendly operation.
- Quick results with minimal sample preparation.
- Durable and reliable construction.
- Compliant with international standards.
ASTM, D6371, EN, 116, IP, 309, JIS, K2288
Features
The Model OC-23-V Automated Octane PRF and TSF Blender is fully compliant with ASTM ASTM D2699 , ASTM D2700, ASTM D2885, ASTM D613.
The Model OC-23-VAutomated Octane PRF and TSF Blender has a simple operation system.
Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
1st Year: | Temperature Sensor 1 pc Pipette 1 pc Vacuum Adapter (with O-Ring P-6) 1 pc Vacuum Tubing (with Connector) 1 pc Filter Unit (without Holder and Filter) 1 pc Filter Holder (with Filter) 1 pc Filter 30 pcs O-Ring P-5 (for Pipette) 10 pcs O-Ring P-6 (for Adapter) 5 pcs O-Ring S-14 (for Filter Holder) 5 pcs Test Jar 3 pcs Spacers 1 pc |
2nd Year: | Same as 1st year |
Remaining Parts: | Chiller for -51oC of Bath Control (ambient temp @20oC): TANAKA TCU-40B (Made in Japan) Chiller for -67oC of Bath Control (ambient temp @20oC): Julabo FP50-MA (Made in Germany) Built-in Clock Board Printer: BS2-80TS (with AC Adapter and Connecting Cable) |
Specs
CONFORMING STANDARDS | ASTM D6371, EN116, IP309, and JIS K2288 | |
TYPE | 1 test head | |
SPECIMEN VOLUME | 45ml | |
MEASURING RANGE | (typical) RT to -60 oC (The lowest temperature varies with the chiller liquid temperature and ambient temperature.) | |
DISPLAY | By a fluorescence display(VFD) Temperatures displayed with 0.1C increments | |
TEMPERATURE SENSOR | PT-100 | |
CFPP DETECTION | MBy means of a photo-electric detector consisting of an LED, photo transistor, and light guide (fiber optics). Upper and lower light guides are mounted on sliding type holder. | |
VACUUM REGULATOR | Consists of a micro air pump, pressure switch, solenoid valve and a plastic bottle | |
COOLING AND HEATING (needs optional chiller) | By Peltier cells. The hot side of the Peltier cells needs to be cooled by external chiller. | |
TEMPERATURE CONTROL | By step (-34 oC, -51 oC and -67 oC) or linear. The linear cooling rate can be programmed | |
SAFETY FEATURES | A. Over cut: as hot side of TED reaches 60 oC , warning buzzer beeps and stops. B. Self diagnostic: reported by an intermittent buzzer and a text message when any temperature sensor breaks down or the battery has drained out. C. System trouble: reported by a buzzer when the built-in microprocessor runs off. |
|
DATA OUTPUT | RS-232C 1 channel (for PC or Optional Printer). 2 nd set channel is optional. | |
POWER REQUIREMENTS | 100 or 120VAC, 5A 220 or 240VAC, 3A Please specify AC voltage when ordering |
|
DIMENSIONS AND WEIGHT | 350mmWx550mmDx480mmH 27kg |
Downloads
Download our brochure for more details