The simple, standardized design of the boiling point apparatus guarantees compliance with ASTMD1120 for determining the equilibrium boiling point of engine coolants.
The boiling point determination apparatus consists primarily of a sturdy water-cooled, reflux, glass-tube condenser with a 200 mm long jacket and standard taper, drip-tip, male ground-glass joint. The boiling point apparatus' electric heating mantle works quickly to bring samples to a boil in compliance with heating and refluxing rates specified in ASTM D1120.
Designed for simple use under equilibrium conditions at atmospheric pressure, the 3 kg boiling point determination apparatus comes fully-equipped with a 100 mL, heat resistant glass flask with standard 19/38 tapered neck, female ground-glass joint, and 10 mm diameter side-entry tube, allowing the end of the thermometer device to be centrally positioned within the flask, approximately 6 mm from the bottom.
Features
BOILING POINT fully compliant with ASTM D1120, providing both standard method and refined methodology.Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: |
No spare parts are required
|
| 2nd Year: |
No spare parts are required
|
| Remaining Parts: | SILICON CARBIDE GRAINS, pack of 100 g DIGITAL STOPWATCH 7 digit LCD, max.10 hours, 1/100 sec, digit h=8 mm THERMOMETER ASTM 2C HEATING MANTLE FLASK, 100 ml CONDENSER STOPPER FOR THERMOMETER |
Specs
| Test Method Compliance | ASTM D1120 | |
| Power supply | 230V ±10% 50Hz | |
| Power | 100W | |
| Weight | 3 kg | |
| Dimensions | 15x15x12 cm | |
| Shipping weight | ||
| Dimensions with crate |
