+ 312.476.9292
Log In
Cart

EVAPORATION GUM BATH “AIR AND STEAM JET”

Gum Content in Fuels
Methods:
ASTM D381, DIN 51 784, EN 26246, IP 131, IP 540, ISO 6246,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								ASTM D381, 
								
								
								
								
								
								DIN 51 784, 
								
								EN 26246, 
								
								
								
								
								
								IP 131, IP 540, 
								
								ISO 6246, 
								
								
								
								
								
								
								
								

Practical design for the everyday user

The Evaporation Gum Bath Air and Steam Jet” is fully compliant with methods ASTM D381 IP131 IP540 EN26246. This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasoline’s or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives see Note 7 for additional information) at the time of test.

The Evaporation Bath is equipped with 18/8 stainless steel jacket in aluminium block, 5 concentric pre-heating coils with 5 wells connected to the central collector with socket for steam measurer, 5 mobile jets, insulated air gap. Its built-in steam over heater with regulator and condensate discharge valves are designed to help determine the gum content of gasoline. Heating and overheater are controlled by a digital thermoregulator PID with an over-temperature alarm. The bath is fitted with a flow-meter wrapped in a protection covering, and steam flow-metric manometer. The overheater for steam can be a disconnect.

features__astm compliant

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
BEAKER, pack of 5 pcs x2
2nd Year:
Same as 1st year
Remaining Parts:
ANALYTICAL BALANCE Range 220 g., readout 0.0001, pan Ø80 10-2411 BEAKER, conf.5 pz Ø50×78 mm
TONG For use in handling the beakers, PTFE covered
STEAM GENERATOR
AIR PUMP
THERMOMETER ASTM 3C IP 73C
FLOWMETER
JET, pack of 5 pcs
PRESSURE GAUGE
HEATER
STRIP HEATER
PT100A PROBE
DIGITAL THERMOREGULATOR
STATIC RELAY
EARTH LEAKAGE CIRCUIT BREAKER
BIPOLAR YELLOW SWITCH
Test Method Compliance   ASTM D381 IP 131 IP 540 EN 26246 (obs) ISO 6246 DIN 51784
Temperature ambient    From ambient to 250°C (482°F)
Temperature stability    ±3°C
Voltage / Current    220V
Frequency   50 or 60Hz 
Power   3500W
Weight    65 kg (143 lbs)
Dimensions   75x52x90 cm (29x30x35 inches)
Shipping weight    
Dimensions with crate    

 

EVAPORATION-BATH-AIR-AND-STEAM-JET-ASTM-D381

Categories:
, , , , , , , , , , , , .
Tag:
.
SKU: AYA-31-00012.