Oil bath completely made of stainless steel, with double insulatedwall. Temperature regulation by digital thermoregulator PIDwith PT100 probe class A and overtemperature alarm, stainlesssteel heater, motor stirrer, safety internal level for low liquidwith warning lamp.T-shaped stainless steel stirrers rotate in their glasses at aconstant speed of 1000 50 rpm. Transmission frame andupper weir with bearings block and pulley.
Features
RUST-PREVENTING OF OILS fully compliant with ASTM D665, ASTM D3603, ASTM D5534, providing both standard method and refined methodology.Models
| Models | Positions | |
| Model 1940/4 | RUST PREVENTION BATH (4 POSITIONS) | |
| Model 1940/6 | RUST PREVENTION BATH (6 POSITIONS) |
Accessories
The following accessories are recommended for purchase in sequential order (see eStore):
| 1st Year: | For ASTM D665 IP 135 ISO 7120 TEST ROD x4 ALUMINUM OXIDE CLOTH 150 pack of 50 pcs x4 ALUMINUM OXIDE CLOTH 280, pack of 50 pcs x4 For ASTM D3603 D5534 HORIZONTAL SPECIMEN VERTICAL SPECIMEN PTFE WASHER ALUMINUM OXIDE CLOTH 150, pack of 50 pcs x4 ALUMINUM OXIDE CLOTH 280, pack of 50 pcs x4 |
| 2nd Year: | Same as 1st year |
| Remaining Parts: | BELT MOTOR PROBE PT100A HEATER DIGITAL THERMOREGULATOR STATIC RELAY BIPOLAR GREEN SWITCH BIPOLAR YELLOW SWITCH For ASTM D665 IP 135 ISO 7120 BEAKER, 400 ml Tall form TEST ROD Made of steel ALUMINUM OXIDE CLOTH 150, pack of 50 pcs CAMI 150 / FEPA P150 ALUMINUM OXIDE CLOTH 280, pack of 50 pcs CAMI 240 / FEPA P280 GRINDING AND POLISHING DEVICE With suitable chuck for holding the test rod ASTM/IP and one for ISO. Rotation 1750 ±50 rpm SILICONE OIL 20 cSt pack of 25 kg For temperature from ambient to 120°C (248°F) THERMOMETER ASTM 9C IP 15C THERMOMETER IP 21C Only for Procedure “A” and “B” BEAKER COVER Made of PMMA HOLDER Made of PMMA “T” STIRRER Made of stainless steel Only for Procedure “C” BEAKER COVER Made of PCTFE HOLDER Made of PTFE AUXILIARY STIRRER Made of stainless steel For ASTM D3603 D5534 BEAKER, 400 ml Tall form BEAKER, 25 ml (solo per ASTM D5534) BEAKER COVER Consisting of: PMMA cover with two stainless steel rods and PTFE specimen holder. TEST SPECIMENS “T” STIRRER Made of stainless steel ALUMINUM OXIDE CLOTH 150, pack of 50 pcs CAMI 150 / FEPA P150 ALUMINUM OXIDE CLOTH 280, pack of 50 pcs CAMI 240 / FEPA P280 GRINDING AND POLISHING DEVICE With suitable chuck for holding the test rod ASTM/IP and one for ISO. Rotation 1750 ±50 rpm SILICONE OIL 20 cSt pack of 25 kg For temperature from ambient to 120°C (248°F) THERMOMETER ASTM 9C IP 15C |
Specs
| Test Method Compliance | ASTM D665 ASTM D3603 ASTM D5534 IP 135 ISO 7120 | |
| Temperature | from ambient to 120°C (248°F) | |
| Stability | ±0.1°C | |
| Power supply | 230V ±10% 50/60Hz | |
| Power | 1800W | |
| RUST PREVENTION BATH (4 POSITIONS) | ||
| Weight | 35 kg | |
| Dimensions | 65x22x60 cm | |
| RUST PREVENTION BATH (6 POSITIONS) | ||
| Weight | 40 kg | |
| Dimensions | 115x22x60 cm | |
| Shipping weight | ||
| Dimensions with crate |
