+ 312.476.9292
Log In
Cart
REDWOOD-NO.1-VISCOMETER-IP-70-0500600855 zoom

REDWOOD-NO.1-VISCOMETER-IP-70-0500600855
Full Screen

REDWOOD VISCOSITY

Portable indicator of temperature and flow, precise measurements that keep you in the know.
Methods:
IP 70,

								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								
								IP 70, 
								
								
								
								
								
								
								
								
								
								

Practical design for the everyday user

The simple design of the Redwood viscometer apparatus confirms to standard IP 70 requirements while providing accurate measurements for viscosity tests.

The stainless steel Redwood viscometer apparatus is equipped with digital temperature regulation, over temperature alarm, and an insulated double wall, because operator safety is a priority. A single gage fill point, visible from the outside of the instrument, allows for easy fill without overflow while the internal indicator alerts to low liquid levels. The stainless steel electric heating component and cooling coil allow for quick boiling and cooling of liquids, while the motorized stirrer negates the need for dangerous and intensive manual labor for a viscosity test.

The viscometer is available in either Redwood orifice no. 1 or orifice no. 2, ensuring testability for liquids with flow of 20-2000 seconds or 2000+ seconds, respectively. Each model is available with 1, 2, or 3 positions, and comes equipped with brass oil cup with closing-ball ended rod, cup cover, and leveling screws to ensure accurate results. The in-bath drain plug provides for easy post-test drainage of liquids.

With a capacity of approximately 7 liters and a weight of 12 kg (26.45 lbs.), the ruggedly-built Redwood allows for sturdy portability during field use and laboratory-quality temperature and viscosity measurements.

Models    Positions
120   RED WOOD VISCOMETER NO.1
122   RED WOOD VISCOMETER NO.2
120/2   RED WOOD VISCOMETER NO.1 (2 POSITIONS)
122/2   RED WOOD VISCOMETER NO.2 (2 POSITIONS)
120/3   RED WOOD VISCOMETER NO.1 (3 POSITIONS)
122/3   RED WOOD VISCOMETER NO.2 (3 POSITIONS)

The following accessories are recommended for purchase in sequential order (see eStore):

1st Year:
KOHLRAUSCH RECEIVING FLASK 50 ml,
pack of 3 pcs x1
O-RING, pack of 5 pcs x1
2nd Year:
Same as 1st year
Remaining Parts:
KOHLRAUSCH RECEIVING FLASK 50 ml, pack of 3 pcs
DIGITAL STOPWATCH 7 digit LCD, max.10 hours, 1/100 sec, digit h=8 mm10-0371/20
SILICONE OIL 20 cSt pack of 25 kg For temperature from ambient to 120°C (248°F)10-0371/50
SILICONE OIL 50 cSt, pack of 25 kg For temperature from 100°C (212°F) to 200°C(392°F)
THERMOMETER IP 8C
THERMOMETER IP 8F
THERMOMETER IP 9C
THERMOMETER IP 9F
THERMOMETER IP 10C
THERMOMETER IP 10F
CALIBRATED OIL CUP WITH ORIFICE NO.1Brass
CALIBRATED OIL CUP WITH ORIFICE NO.2Brass
CLOSING-BALL-ENDED ROD
PROBE PT100A
HEATER 800W (for no.1)
HEATER 2200W (for no.2)
LEVEL SWITCH (for no.1)
LEVEL SWITCH (for no.2)
DIGITAL THERMOREGULATOR
STATIC RELAY
BIPOLAR GREEN SWITCH
MOTOR STIRRER
Applicable Test Methods   IP 70
Temperature   from ambient to 95°C (203°F) for no.1
from ambient to 250°C (482°F) for no.2
Stability   ±0.1°C
Bath capacity   7 about liters
Power supply   230V ±3% 50/60Hz
Power   800W for no.1
1200W for no.2
Weight   12 kg
Dimension   No.1 40x29x64 cm
No.2 40x29x61 cm
Categories:
, , , , .